Culligan Platinum Series Spezifikationen PDF herunterladen (Seite 16)

Performance Data Sheet

Culligan knows the more informed you are about your water treatment systems, the more confident you

will be about its performance. It’s because of this and more than sixty years of commitment to customer

satisfaction that Culligan is providing this Performance Data Sheet to its customers.

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with

your actual water treatment needs. It is recommended that before purchasing a water treatment unit, you

have your water supply tested to determine your actual water treatment needs.

MANUFACTURER: Culligan International Company,

One Culligan Parkway, Northbrook, IL 60062-6209 USA

(847) 205-6000

PRODUCT: Culligan Platinum Series

™

9” Water Softener with Soft-Minder

Meter

TESTING CONDITIONS & RESULTS:

Flow Rate: 9 gpm Capacity: 15,700 grains @ 4.0 lb. salt

Pressure: 30 - 40 psi 22,000 grains @ 8.0 lb. salt

Acidity: Non-Corrosive 24,000 grains @ 12.0 lb. salt

Temperature: 68° (20°C)

pH:

7.6

SOFTENER SPECIFICATIONS:

Maximum Flow Rate: 14 gpm (52 Lpm)

Pressure Drop at Maximum Flow Rate: 15 psi (102 kPa)

Operating Temperature Range: 33 - 120° F (1 - 50°C)

Maximum Drain Flow Rate: 2.0 gpm (8 Lpm)

Working Pressure Range: 20 - 125 psi (140 - 860 kPa)

The Culligan Platinum Series water softeners with Soft-Minder meter are tested and certified

under ANSI/NSF Standard 44 for softener performance.

Refer to the Specifications, Familiarization and Warranty section of this Owner’s Guide for more specific

product information. To avoid contamination from improper handling and installation, your system

should only be installed and serviced by your Culligan Man. Performance will vary based on local water

conditions. The substances reduced by this system are not necessarily in your water.

Culligan water softeners are designed to work with any salt of good quality, although it is recommended

that you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this

softener. For replacement components, please contact your local Culligan dealer or 847-205-6000 for the

dealer nearest you.

NOTICE: This softener is not intended to be used with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after the system.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Culligan Platinum Series Spezifikationen Seite 16